Tubeless Rim Tape

Say goodbye to faffy installs and sticky mess. Our Juice Lubes Rim Tape is your first step to the perfect tubeless setup.

With high-tensile strength dual-layered film and a pressure-sensitive adhesive that grips like mad (but peels clean), this stuff is made for a fast, faff-free setup. It’s got just the right amount of stretch to hug the shape of your rim, and we’ve even chucked in finishing strips to help you get that perfect airtight seal.

✅ High-strength dual-layer film
✅ Bespoke pressure-sensitive adhesive
✅ Perfect stretch for easy install
✅ Contours to your rim
✅ Includes finishing strips for a proper airtight seal

Available in 21, 25, 30 and 35mm widths – there’s a size for every setup. Stick it down, seal it up, and get rolling.

STEP BY STEP

GET SET

Start with a clean dry rim, our Ultimate Workshop Degreaser will remove any grease or old adhesive. Use an old rag or microfibre cloth to wipe it away.
Be sure to select the right size rim tape for your chosen setup.

TAPE IT

Start applying the tape 2 spoke holes back from the valve hole. Press the tape down firmly into the centre of the rim as you go and smooth it out towards the edges, removing any trapped air as you go. Take it steady.
Run the tape around the entire rim whilst keeping tension and working air from beneath the tape as you go. Finish 2 spoke holes past the valve hole. Cut the tape at 45 degrees for a cleaner finish.

CHECK AND SEAL

Check for any trapped air under the tape, push any bubbles out towards a spoke hole. 
Cover the end of the fitted tape with one of the finishing strips provided. This will help prevent any peel back.
Use a small spike to pierce a hole in the tape over the valve hole.
Fit our fancy valves. Whack a trye on. Add some Juice Lubes Tyre Sealant and give 'er some wind.

For a full tutorial on tubeless setup check out our YouTube